Description
In the production process of melamine decor paper impregnation line, the impregnation process is a very important process step. In the process of production, the melamine resin and urea-formaldehyde resin must be manufactured to a certain extent in the stage of glue preparation and then added separately.
The melamine paper impregnation line is effectively stored in two acid-resistant storage tanks to a certain extent, piped to the impregnation line, and hardeners, wetting agents, release agents and defoamers are added. After the secondary paper is impregnated, the raw paper is impregnated with the first glue tank urea formaldehyde resin, dried by far-infrared rays, impregnated with a melamine resin in the second glue tank, and dried with a desiccant.
Production Process
The Glueing → glue mixing (adding curing agent, release agent, etc.) → first impregnation (mixing of melamine formaldehyde resin and urea formaldehyde resin) → first drying → second impregnation (melamine formaldehyde resin) → second drying → Cool cut.
Main Equipment of Impregnation Line
1. Unwinder
Loading paper tube width |
1000 ~ 1300mm |
Paper tube maximum diameter |
1100mm |
Paper tube center rotary diameter |
1300mm |
Taper center opening adjustment range |
980 ~ 1350mm |
2. Paper receiving device
Feed roller diameter × width | 150×1500mm |
Feed motor power |
1KW |
3. Impregnator
Extrusion roller diameter × width | 310 × 1500mm |
Single-sided back coating roller diameter × width |
210 × 1500mm |
4. 1st dryer secton
Dryer length | 6m |
Drying temperature |
≤165℃ |
Drying temperature deviation |
±2.5 ℃ |
Heating medium |
heat transfer oil |
5. Cooling zone
Cooling length | 1500 mm |
Cooling fan air volume |
5400m³/h |
6. Coating machine
Extrusion roller diameter × width | 310 × 1500mm |
Smoothing roller diameter × width |
150 × 1500mm |
7. 2nd dryer section(3 sections in total)
Total dryer length | 18m |
Drying temperature |
≤165 ℃ |
Drying temperature deviation |
± 2.5 ℃ |
Heating medium |
heat transfer oil |
8. Web alinger
It uses EPC gas-liquid servo adjustment mechanism.
9. Water cooling station
The power is 5KW, and cooling water in the two paper rollers.
10. Rotary servo cutter
Cut length range is ≥1900mm, and it enables manual sampling.
11. Auto stacker system
Paper stacking width |
1250 × 2500mm |
Effective stroke of lifting platform |
1100mm |
Lifting platform maximum load |
2000Kg |
http://www.paperimpregnationline.com/